Videotec MAXIMUS MHXT User Manual download pdf (Page 26)

EN - English - Instructions manual

7.3.5.3 Connection of the camera's

power line in 12Vdc, 24Vac, 120Vac and

230Vac (with power supply)

Remove the removable connector from the board..

Carry out the wiring between the removable

connector and the camera's power supply terminals.

Re-insert the connector into the board.

CONNECTION OF THE CAMERA TO THE POWER SUPPLY

Input voltage of the housing

Input voltage of the

camera/lens

12Vdc 24Vac

230Vac 120Vac

230Vac – – J6 –

120Vac – – – J6

24Vac – J7 J7 J7

12Vdc J13 J13 J13 J13

Tab. 6

J13

TR OUT

– / ~ + / ~

J13

J14

L10

DIP 1

1 2 3 4 5 6 7 8

ALCO A D E 0 8

Fig. 27

7.3.6 Video signal output of an

analogue camera

The installation is type CDS (Cable

Distribution System), do not connect it to

SELV circuits.

If a camera is installed without the use of an analogue

bre optic transmitter the video signal will be

released directly through the input/output device

cables.

Suggested coaxial cables are:

• RG59

• RG174A/U UL1354

Slide the coaxial cable along the input device.

Connect the coaxial cable to the camera's BNC video

connector. Use a 75Ohm BNC male connector (not

supplied).

Fig. 28

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 45 46

Comments to this Manuals

No comments

Videotec MAXIMUS MHXT User Manual Page 26

Comments to this Manuals

Related products and manuals for Video Videotec MAXIMUS MHXT