Videotec MAXIMUS MHXT User Manual download pdf (Page 17)

Instructions manual - English - EN

6.4.1 Fixing to parapet

First of all secure the base of the adapter to the nal

destination. Use screws that can bear at least 4 times

the weight of the unit.

Apply a generous amount of thread locking

compound (Loctite 270).

Tighten the screws.

The thread compound must cure for one hour, allow

for this period prior to completing the installation.

It’s possible to secure the base (01) to the column

adapter NXFWBT using 4 M5 countersunk screws (02)

provided.

Secure the joint (03) to the base through nuts and

washers supplied.

Fig. 7

Fasten the housing at the junction with the M6

screws and washers provided.

Fig. 8

Apply a generous amount of thread locking

compound (Loctite 270).

Tighten the screws.

Pay attention to the xing. Tightening

torque: 9-12Nm max.

The thread compound must cure for one hour, allow

for this period prior to completing the installation.

6.4.2 Fixing with bracket

The bracket can be xed to the vertical wall. Use

screws and wall xing devices that can bear at least

four times the weight of the unit.

Fig. 9

To x the device to the bracket, use 4 washers, 4

stainless steel grower washer, 4 socket head stainless

steel screw M6 provided.

Make sure the thread are free of dirt and debris.

Apply a generous amount of thread locking

compound (Loctite 270) on the 4 screws.

Tighten the screws.

Pay attention to the xing. Tightening

torque: 9-12Nm max.

The thread compound must cure for one hour, allow

for this period prior to completing the installation.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

No comments

Videotec MAXIMUS MHXT User Manual Page 17