Videotec PTH300 User Manual download pdf (Page 28)

Pag. 10 MNPTH3003803

Switching on and off

Before connecting the appliance:

x check that the material supplied corresponds to the specifications indicated on the data plate, following the chapter

Identification data

x check that PTH310 / PTH311 pan & tilt motor and the other components of the installation are closed in order to

avoid direct contact with energized parts.

x make sure that all the parts are fixed in a solid and reliable way

x check that the electrical capacity and the connection cables will support the system power consumption

Maintenance

PTH310 / PTH311 pan & tilt motors do not need a special maintenance.

Make sure they always rest on a solid base, and that the power supply and connection cables do not hinder the

operator.

Problem solution

Even if PTH310 / PTH311 pan & tilt motors are very easy to use, some problems may arise during installation,

configuration or use.

Problem Possible cause Remedy

The control keyboard or the

receiver are working, but the

pan & tilt motor does not

respond

Incorrect connections Check the connections between the pan &

tilt motor and the control unit

The voltage supplied by the

control unit is different from that

required by the pan & tilt motor

Check the identification data of the control

unit and of the pan & tilt motor

The pan & tilt motor

responds to the controls of

DTRX3 receiver but the

PRESET does not work

(only PTH310P / PTH311P)

Incorrect connections Check the connections between the pan &

tilt motor and DTRX3 receiver.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

No comments

Videotec PTH300 User Manual Page 28