Videotec PTH300 User Manual download pdf (Page 22)

Pag. 4 MNPTH3003803

Installation

The installation must be carried out only by qualified technical staff.

The following procedures must be carried out with power supply off, if not otherwise specified.

Unpacking

If the packing shows no relevant defects (due to falls or anomalous abrasions), check the material contained,

according to the list given at paragraph Packing contents chapter Introduction.

The packing materials can be completely recycled. The installer technician is required to dispose of them according to

the differentiated collecting modalities or ,anyway, according to the normative laws in force in the Country of use.

Check of identification data

Before installing the appliance, check that the material supplied corresponds to the specifications indicated on

the data plate, following the chapter Identification data. Do not carry out any modification or connections which are not

provided for in this manual: the use of improper appliances may seriously compromise the safety of the personnel and

the installation.

Adjustment of PTH310 / PTH311 pan & tilt motors

CAUTION: Do not position the pan & tilt motor manually, since this operation may seriously damage the gears.

x Unscrew the cover screws and open the casing

Fig.1

x Identify the cams for vertical and horizontal stroke

adjustment

x Adjust the opening of the cams according to the angle

wished, by forcing them slightly (no tools are

necessary, it is a friction movement)

Fig.2

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

No comments

Videotec PTH300 User Manual Page 22